A Small Gun for Small Part Production Painting.

The MiniCat 60-650 is a fine finish conventional air spray automatic gun for precision finishing of small parts.

Designed for production use, the MiniCat is perfect for any application that requires a fine line to a small round pattern. Air Inlet 1/4" NPS(m) Fluid Inlet 3/8" NPS(m) Weight 5 oz. Standard nozzles setup 0.7 x 21-M66-1 (other nozzles available).

Repair kit P/N - 10-109
Parts Sheet - MiniCat Automatic Gun 60-650.

The A100C is an Industrial General Purpose Automatic Air Spray Gun of the Highest Quality.

Designed for production use the Autocat is perfect for all coatings. The gun can be used external, internal mix and carbide tipped fluid nozzles. Air Inlet: 1/4" NPS (m) Fluid Inlet 3/8" NPS(m) Weight 24 oz. Standard nozzle setup:1.2 x 21-2263 14 CFM (other nozzles available) Please call to discuss gun setup.

Repair kit P/N - 10-107
Parts Sheet - A100C Autocat Automatic Gun

The A300C is a Fine Finish Conventional Air Spray Gun for Achieving the Ultimate in Fine Atomization.

Designed for production use, the A300C is perfect for wood, automotive or any fine finish application. All stainless steel fluid passages and incorporates the patented 12-point plenum design.

Air Inlet: 1/4" NPS(m)
Fluid Inlet: 3/8" NPS(m)
Weight: 24 oz.
Standard nozzle setup 1.0 x 1010 (other nozzles available)

Repair Kit - 10-107
Parts Sheet - A300C.

The A200C Corrosion Control Automatic Gun is a General Purpose Conventional Automatic Air Spray Gun with the Power to Atomize Those Hard to Break Up Coatings.

Air Inlet: 1/4" NPS(m) Fluid Inlet: 3/8" NPS(m) Weight: 24 oz. Standard nozzle setup: 1.8 x 2064 (other nozzle available)

Repair kit P/N - 10-107
Parts Sheet - A200C

Autocat General Purpose Road Marking Automatic Gun

This designed for spraying road marking and line striping paints. Air Inlet: 1/4" NPS(m) Fluid Inlet: 3/8" NPS(m) Weight: 24 oz. Standard nozzle setup 2.8 x 21-2709. 5.75 CFM (other nozzles available)

Repair Kit - 10-107
A100CRM Autocat Road Marking Gun Parts Sheet - A100C Parts Sheet

A100CVT Autocat General Purpose Tungsten Carbide Automatic Gun is designed for spraying abrasive materials, porcelains and ceramics.

The fluid nozzle orifice and fluid needle tip are fabricated from Tungsten Carbide for maximum tip life. Air Inlet: 1/4" NPS(m) Fluid inlet: 3/8" NPS(m) Weight: 24 oz. Standard nozzle setup: 2.2V x 2167 (other nozzles available)

Repair Kit - 10-107.
Parts Sheet - A100CVT

The A200CC is the same as the A200C with the addition of a recirculating feature to keep the paint from settling.

Air Inlet: 1/4" NPS (m)
Fluid Inlet: 3/8" (M)

A200CC - Parts Sheet
Repair Kit - 10-107.