Professional Mini Gravity Feed Spray Gun
The T2 is a gravity feed mini gun for use with a range of coatings from top coats to stains. This is great for all your touch-up needs. Comes standard with 1.3mm nozzle and 125cc plastic cup. This gun complies with all environmental regulations for HVLP. (This is a CA60-T2-2) See CA-T2 for complete spray gun kit.

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.0mm (m)
Weight - 15 oz.
Requires 4 CFM
Repair Kit : CA60-T2-10
T2 Parts Sheet

Mini Gun, Big Performance!
The T2 is a gravity feed mini HVLP touch up gun for use with a range of coatings from top coats to stains. This is great for all your touch-up needs.

CA-T2 Spray gun with:
• CA60-T2-30-08 0.8 mm Tip & Needle
• CA60-T2-30-12 1.2 mm Tip & Needle
• CA60-T2-30-13 1.3 mm Tip & Needle
• 51-406 Aluminum 150 mL Cup
• 51-407 Plastic 125 mL Cup

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.0mm (m)
Weight - 15 oz.
Requires 4 CFM

Glazing Made Easy!

The T2 Glaze kit from CAT is intended to give finishers the option of being able to spray their glaze on the surface-great for shading or lay a bead of material with precision. The glaze nozzle works without air and simply allows you to lay the smallest bead of material on your surface great for placing the glaze in raised door panels or special projects.

CA-T2-GLAZE
• 60-T2-30-10-G Glaze Tip & Needle •
60-T2-30-12 1.2 mm Tip & Needle
• 60-T2-30-13 1.3 mm Tip & Needle
• 51-406 Aluminum 150 mL Cup
• 51-407 Plastic 125 mL Cup

Specifications:
Air Inlet - 1/4” NPS (m) Fluid Inlet - 16mm x 1.0mm (m)
Weight - 15 oz. Requires 4 CFM
Parts Sheet

C.A.Technologies CPR Spray Gun Combines the Transfer Efficiency of HVLP!

This spray gun speed and quality of finish of conventional air spray guns.
The nozzle requires 11cfm @ 29 psi recommended inlet pressure Transfer efficiency of HVLP Stainless steel fluid passages Patented 12 point atomization Includes 3 needle & nozzle sizes Includes HVLP & Compliant air caps Includes durable plastic case plus additional accessories This Cat Pack features the 3M Paint Preparation System Pressure Cup with Regulator
Air Inlet 1/4” NPS (m)
Fluid Inlet 3/8” NPS (m)
Weight 20 oz
Fluid tip included: 1.3, 1.5, 1.7 Air cap 11.5 CFM