You are here:Home > CAT PACKS > H2O Waterborne
H2O Waterborne CAT Pack Series

C.A. Technologies has taken the 'CPR" (CAT Pressure Reduced) fine finish technology and adapted it for use with waterborne coatings and finishes. This provides the user of waterborne technology a professional quality compliant air spray gun. This gun will provide the quality finish of a fine finish air spray gun and the transfer efficiency of HVLP.  This waterborne professional spray gun comes in 4 CAT Pack versions. We also have off-line standard H2O-CPR Outfits or we can custom configure an outfit for your special requirements.  Please give us a call toll free 877.490.1777
  • Stainless Steel fluid passages
  • Patented 12 point atomization
  • Includes 3 needles
  • Includes 3 nozzle sizes
  • Includes HVLP air cap
  • Includes  Compliant air cap
    • Comes in a H2O Cat Pack Pressure Set Up
    • Comes in a H2O CAT Pack w/ a Pressure Cup
    • Comes in a H2O CAT Pack Gravity Feed
    • Comes in a H2O CAT Pack w/ 3M PPS Set Up
Toll Free 1.877.490.1777


Sort By:
Page of 1
H2O-CPR Cat Pack H2O-CPR Cat Pack



Compliant Air Spray Guns For Waterborne Coatings
The CPR Technology combines the transfer efficency of HVLP The speed and quality of finish of conventional air spray guns. The nozzle requires 11cfm @ 29 psi recommended inlet pressure. Transfer efficiency of HVLP Stainless steel fluid passages Patented 12 point atomization Includes 3 needle & nozzle sizes Includes HVLP & Compliant air caps Includes durable plastic case plus additional accessories Air Inlet 1/4” NPS (m) Fluid Inlet 3/8” NPS (m) Weight 20 oz Fluid tips included: 1.3, 1.5, 1.7 Air cap requires 11.5 CFM

Sales Sheet - CPR

Our Price: $569.06
H2O CPR Cat Pack Gravity, PPS H2O-CPR-G-PPS H2O Cat Pack Gravity Compliant w/PPS



For Waterborne Coatings and Finishing

The CPR Technology combines the transfer efficiency of HVLP The speed and quality of finish of conventional air spray guns. The nozzle requires 11cfm @ 29 psi recommended inlet pressure Transfer efficiency of HVLP Stainless steel fluid passages Patented 12 point atomization Includes 3 needle & nozzle sizes Includes HVLP & Compliant air caps Includes durable plastic case plus additional This is a gun for waterborne materials The gravity cup is a 3M PPS. Air Inlet 1/4” NPS (m) Fluid Inlet 16m x 1.5 Weight 25 oz Fluid tips included: 1.3, 1.5, 1.7 Air cap requires 11.5 CFM With the HVLP air cap this gun complies with all environmental regulations for HVLP.

Parts Sheet - CPR-G
Repair Kit - CPR-G

Our Price: $677.20
Sale Price: $644.00
You save $33.20!
H2O-CPR-G Cat Pack Gravity H2O-CPR-G Cat Pack Gravity



H2O CPR Technology

Combines the transfer efficiency of HVLP The speed and quality of finish of conventional air spray guns. The nozzle requires 11cfm @ 29 psi recommended inlet pressure Transfer efficiency of HVLP Stainless steel fluid passages Patented 12 point atomization Includes 3 needle & nozzle sizes Includes HVLP & Compliant air caps Includes durable plastic case plus additional Air Inlet 1/4” NPS (m) Fluid Inlet 16m x 1.5 Weight 25 oz Fluid tip included: 1.3, 1.5, 1.7 air cap requires 11.5 CFM This gun with the HVLP air cap complies with all environmental regulations for HVLP.

Parts Sheet - CPR-G
Repair Kit - 10-106

Our Price: $645.07
H2O-CPR-PPS-R2 H2O-CPR-PPS-R2 H2O Cat Pack



C.A.Technologies CPR Spray Gun Combines the Transfer Efficiency of HVLP!

This spray gun speed and quality of finish of conventional air spray guns.

The nozzle requires 11cfm @ 29 psi recommended inlet pressure Transfer efficiency of HVLP Stainless steel fluid passages Patented 12 point atomization Includes 3 needle & nozzle sizes Includes HVLP & Compliant air caps Includes durable plastic case plus additional accessories This Cat Pack features the 3M Paint Preparation System Pressure Cup with Regulator
Air Inlet 1/4” NPS (m)
Fluid Inlet 3/8” NPS (m)
Weight 20 oz
Fluid tip included: 1.3, 1.5, 1.7 Air cap 11.5 CFM

Our Price: $879.00
   
 
Cat Pressure Reduced Technology results in higher transfer efficiency. Lower atomization air pressures (11 cfm at 29 psi inlet air pressure ) applies the paint on the part and is not lost in over-spray.