Sprint Manual Unit Airfluid XE USA Hopper Feed

Sprint Airfluid XE Manual Powder Coating
Corona manual gun PEM-X1
Control device EPG-Sprint XE
Injector PI-F1
Device cart (optional with vibrating table)
Gun cable & powder hose length 16 ft (5m) Ø 7/16 in (Ø 11mm)
Power cord length 9.8 ft (3m)
Grounding cable 32.8 ft (10m)
Connection hose.
Does not include hopper.
see 264268 for 60 L Powder Container without injector.
see 264224 for 25 L Powder Container without injector.

Sprint Airfluid XE

Sprint Airfluid XE Manual Powder Coating
The new manual unit combines functionality and extraordinary design.
By means of a central and dynamic knob, all parameters –grouped
into four functional sections can be set easily. The unique Cascade
characteristic line setting and the TRIBO compatibility offer a high level
of flexibility for any powder. In combination with the new manual gun
PEM-X1, the manual unit gives perfect coating results. The powder
feeding is carried out directly from the original container – optionally
out of the 60l stainless steel container.
Sprint XE Box Feed Included Items
Corona Manual Gun PEM-X1
Control device EPG-Sprint XE
Injector PI-F1
Suction lance with fluid cap
Device cart with vibrating table
Gun cable & powder hose length 16 ft (5m) Ø 7/16 in (Ø 11mm)
Power cord length 9.8 ft (3m)
• Grounding cable 32.8 ft (10m)

PEM-X1 CG (Cup Gun Kit)

PEM-X1 CG (Cup Gun Kit)
The simple handling and perfect ergonomics of WAGNER cup guns make them ideal for lab and development purposes and for powder coating individual items and very small quantities.
Simple plug-in principle for the cup.
Short and safe paint change times of approximately 15 seconds.
Funnel beaker with special geometry.
The different slope angles ensure constant flow even with difficult powder types.
Integrated Venturi feeding principleVery fine and constantly homogeneous dosage. dispensing of the powder quantity.
The coating parameters are set via the control module.
Short and safe paint change times of approximately 15 seconds.
Funnel beaker with special geometry.
The different slope angles ensure constant flow even with difficult powder types.
Integrated Venturi feeding principleVery fine and constantly homogeneous dosage. dispensing of the powder quantity.
The coating parameters are set via the control module.
All coating-relevant parameters are saved and accessed via the fully electronic control module.