WAGNER GM 5000EACF-FM Electrostatic AirCoat Fan-Spray Package – 2396199

AirCoat Finish Quality with Electrostatic Efficiency

The WAGNER GM 5000EACF-FM Fan-Spray Package (2396199) combines AirCoat atomization with electrostatic attraction to provide a soft, controllable fan pattern and efficient coating application. This standard-resistance package is designed for compatible low-conductivity solvent-borne coatings.

There is a quiet satisfaction in watching a coating settle evenly across a workpiece. The GM 5000EACF is built to make that result repeatable. Pressure-assisted material delivery performs much of the atomization work, supporting air refines the spray pattern, and electrostatic attraction helps direct the charged coating toward a properly grounded workpiece.

The result is the production capability of AirCoat technology combined with the material-saving potential of electrostatic application. For manufacturers concerned with surface quality, coating consumption, overspray, and consistent daily output, that combination can make a meaningful difference.

Improve finish control and make better use of every gallon of coating. Order WAGNER package 2396199 or call 817-490-1777 for system assistance.

Three Technologies Working Together

• Pressure-assisted material delivery: Supplies the fluid pressure required for efficient production application.
• Supporting atomizing air: Softens, shapes, and refines the fan pattern for greater application control.
• Electrostatic attraction: Helps draw charged coating toward a properly grounded conductive workpiece.

Features and Benefits

• Soft, homogeneous fan pattern: Supports smooth application, consistent film build, and professional finish quality.
• Improved transfer efficiency: Properly configured electrostatic application can help place more coating on the product.
• Reduced coating consumption: Better material attraction can reduce the amount of coating lost as overspray.
• Reduced booth loading: Less airborne overspray can help reduce filter loading and cleanup requirements.
• Wraparound effect: Electrostatic attraction can improve coating coverage around edges, tubes, frames, and complex conductive parts.
• Ergonomic manual gun: Lightweight construction, good balance, and low trigger force help reduce operator fatigue.
• Integrated high-voltage cascade: Generates the electrostatic charge through the spray gun without requiring a separate external cascade.
• Flexible electrode: Applies the charge directly at the material nozzle and supports consistent charging under demanding conditions.
• Purpose-designed air cap and nozzle: The included components are engineered to balance atomization quality and electrostatic charging.
• VM 5000 control: Provides adjustment and monitoring of the electrostatic high voltage and current limit.
• Grounding supervision: The control system monitors gun grounding and switches off high voltage if the grounding connection is interrupted.
• Replaceable gun hook: Helps reduce service expense if the suspension hook becomes damaged or worn.
• Durable wetted components: Stainless steel, carbide, and engineered polymers support demanding professional use.

GM 5000EAC Performance

• Application technology: Electrostatic AirCoat
• Spray pattern: Fan spray
• Coating type: Compatible low-conductivity solvent-borne coatings
• Maximum material pressure: 3,626 PSI (250 bar)
• Gun weight: Approximately 710 grams
• Compressed-air connection: G 1/4-inch male
• Operating-temperature range: 41–104°F (5–40°C)
• Approval configuration: FM package
• Hose resistance: Standard resistance

Industrial Finishing Applications

The GM 5000EACF-FM package is suited to professional finishing operations where appearance, production speed, and material efficiency must remain in balance.

• Metal furniture, shelving, and fabricated assemblies
• Machinery, equipment, and industrial enclosures
• Automotive, truck, trailer, and transportation components
• Agricultural and construction equipment
• Conductive metal frames, railings, and tubular components
• Complex workpiece shapes that may benefit from electrostatic wraparound
• Compatible wood-finishing applications using properly engineered grounding methods
• Manual production lines requiring repeatable fan-spray control

Package Includes

• GM 5000EAC-FM electrostatic AirCoat spray gun: Part number 2344473
• VM 5000 electrostatic controller: Part number 2344480
• 25-foot standard-resistance hose package: Part number 2339171
• ACF 5000 13/40 AirCoat fan-spray nozzle: Part number 395413
• ACF 5000 HV Blue air cap: Part number 2314203

Important: This package does not include the material pump, fluid-pressure regulator, suction system, material hose, pump air controls, or other equipment required to create a complete operating spray system.

Standard-Resistance Configuration

Model 2396199 includes the standard-resistance hose package for compatible low-conductivity solvent-borne coatings. Coating electrical resistance must be measured or confirmed before choosing the standard-resistance package.

A separate low-resistance package is available for coatings requiring that configuration. Do not select a package based only on whether the coating is described as solvent-borne. The coating’s measured electrical properties and WAGNER’s current selection requirements determine the correct system.

Material-Delivery Equipment Required

The GM 5000EACF requires a compatible high-pressure material-delivery system. The pump must provide sufficient flow and pressure for the coating, nozzle, hose length, desired production rate, and application conditions.

Required equipment may include:

• Compatible pneumatic high-pressure pump
• Material-pressure regulator
• Pump air-control assembly
• Fluid filter appropriate for the selected nozzle
• Material suction or supply system
• Pressure-rated fluid hoses and fittings
• Clean, dry, regulated atomizing air
• Approved grounding equipment

Important Application Requirements

This standard-resistance electrostatic system is intended for compatible low-conductivity solvent-borne coatings. Confirm coating resistance, viscosity, chemical compatibility, required fluid pressure, and atomizing-air requirements before ordering.

Effective electrostatic application requires proper grounding of the spray gun, material-delivery equipment, conductive objects in the spray area, and the workpiece. Hooks, conveyors, and contact points must remain clean enough to maintain an effective electrical path to ground.

The installation also requires approved material-delivery equipment, clean compressed air, suitable ventilation, proper fire protection, and a correctly designed spray area. Follow the current WAGNER operating manual and all applicable fire, electrical, environmental, occupational-safety, and hazardous-location requirements.

Confirm Compatibility Before Ordering

The correct electrostatic package, material pump, regulator, nozzle, air cap, hose type, and operating settings depend on the coating and production requirements. Our finishing specialists can help evaluate the application and identify the additional components required for a complete system.

Explore Financing

Acquire the finishing equipment you need while preserving working capital. Click the Approve icon on the product page to review available financing options and apply.

Better Control Is Where a Better Finish Begins

A dependable finishing system should do more than spray material. It should help the operator work comfortably, help the coating reach the product, and help every finished part meet the same standard. The WAGNER GM 5000EACF brings that kind of control to the production floor.

Order WAGNER GM 5000EACF-FM package 2396199 today, or call 817-490-1777 for help confirming coating resistance, pump requirements, and complete system compatibility.