.jpg)
For More Information or to Request a Quote Contact Us
RTT Automotive Paint Booths
Built for today. Designed for what comes next.
In every body shop, there’s a moment when the lights hum to life and the air begins to move—the quiet promise of a flawless finish.
That’s where RTT Automotive Paint Booths earn their keep. Practical engineering, innovative airflow, and a layout that fits your space
mean less guesswork, fewer do-overs, and results you can stand behind—whether you spray solvent or water-borne coatings.
Because no two collision centers are the same, RTT offers configurations and options to match your footprint and your workflow.
From lighting that reveals the truth to controls that keep conditions steady, these booths are built to help you deliver the finish your customers remember.
Four EZ Series Booth Models
EZ Classic Crossdraft Paint Booth
Straight-through, front-to-rear airflow. Simple installation and dependable performance for quick throughput and consistent results.
EZ Modified Downdraft Paint Booth
Air enters from the ceiling and sweeps diagonally toward the rear—downdraft-like performance without pit construction.
EZ Side Downdraft Paint Booth
Ceiling-to-floor airflow with side-wall exhaust for even capture. Clean conditions ideal for metallics, pearls, and high-gloss clears.
EZ Pit Downdraft Paint Booth
True top-down airflow with floor-level exhaust through a pit—maximum cleanliness and finish control for premium work.
RTT EZ Series — Airflow Path Comparison
Crossdraft vs. Downdraft Options
| Model |
Primary Airflow Path |
Supply Air (Inlet) |
Exhaust Location |
Pit Required |
Best For |
| EZ Classic Crossdraft |
Front → rear in a straight line across the vehicle |
Filtered doors/front or front ceiling intake |
Rear filter wall/plenum |
No |
Simple installs, budget-friendly, quick throughput |
| EZ Modified Downdraft |
Ceiling down over the vehicle, swept diagonally toward rear |
Ceiling filters (front/center zones) |
Low rear wall or lower rear plenum (no floor pit) |
No |
Downdraft-like performance without pit construction |
| EZ Side Downdraft |
Ceiling down; captured evenly along side-wall plenums |
Full-ceiling filter array |
Side walls (low-level plenums along both sides) |
No |
Balanced capture, cleaner floor, excellent for metallics/clear |
| EZ Pit Downdraft |
Ceiling straight down to floor exhaust through pit |
Full-ceiling filter array |
Floor grates with pit/tunnel and exhaust fans |
Yes |
Highest finish control, premium jobs, heavy production |
Installation Considerations
Floor work, clearances, timelines, and utilities
| Model |
Floor Work |
Typical Building Clearance (Min) |
Lead-Time Range* |
Electrical (typical)** |
Make-Up Air / Heat |
Notes |
| EZ Classic Crossdraft |
No pit required |
Typically 12–14 ft (varies by options) |
Approx. 4–10 weeks* |
Exhaust fans 3Ø; heater packages optional (208–480 V) |
Optional direct-/indirect-fired MAU |
Fastest install; budget-friendly |
| EZ Modified Downdraft |
No pit; low rear plenum |
Typically 12–14 ft (varies by options) |
Approx. 4–10 weeks* |
Exhaust/supply fans 3Ø; heater optional (208–480 V) |
Optional MAU and cure packages |
Downdraft feel without excavation |
| EZ Side Downdraft |
No pit; side plenums |
Typically 12–16 ft (more ceiling work) |
Approx. 4–12 weeks* |
Exhaust/supply fans 3Ø; heater optional (208–480 V) |
Make-up air recommended |
Very clean capture; great for high-finish work |
| EZ Pit Downdraft |
Pit excavation and trenching required |
Typically 12–16 ft (plus pit) |
Approx. 6–14 weeks* |
Exhaust/supply fans 3Ø; heater optional (208–480 V) |
Make-up air and cure packages common |
Highest finish control; premium installations |
* Lead times vary by model, options, and season. Confirm at time of quote.
** Electricals vary by fan HP, heater selection, and local code. Final specifications provided with formal submittals.
Next Steps
Request a quote (1–2 business days): Contact Us
Speak with a specialist: 817-490-1777
