WAGNER GM 5000EACR-FM Electrostatic AirCoat Round-Spray Package – 2396201

Focused Round-Spray Control with Electrostatic Efficiency

The WAGNER GM 5000EACR-FM Round-Spray Package (2396201) combines AirCoat atomization with electrostatic attraction in a professional manual finishing package. Its focused round pattern is designed for parts and surfaces that require concentrated coating delivery rather than a broad fan spray.

There are jobs where a wide pattern is useful, and there are jobs where focused control matters more. Tubing, frames, narrow components, edges, and complex shapes can benefit from a round spray that helps place coating precisely where the operator intends.

When connected to a compatible material-delivery system, the GM 5000EAC uses fluid pressure and supporting atomizing air to produce a soft, controllable spray. Electrostatic charging then helps attract the coating toward a properly grounded workpiece, supporting improved coverage and reduced overspray in suitable applications.

Bring focused electrostatic application to narrow and complex parts. Order WAGNER package 2396201 or call 817-490-1777 for system assistance.

Why Choose an Electrostatic Round-Spray System?

• Focused round pattern: Provides controlled application on narrow, tubular, and complex workpieces.
• AirCoat atomization: Combines pressure-assisted material delivery with supporting air for a soft, manageable spray.
• Electrostatic attraction: Helps direct charged coating toward a properly grounded conductive workpiece.
• Improved transfer efficiency: Proper system setup can help place more coating on the product and less into the booth.
• Wraparound coverage: Can improve coating placement around edges, tubing, frames, and partially concealed surfaces.
• Reduced overspray: Better material attraction can help reduce coating waste, booth loading, and cleanup requirements.
• Ergonomic manual operation: A lightweight, balanced gun with low trigger force supports operator comfort during extended production.
• Integrated high-voltage cascade: Generates the electrostatic charge directly through the manual spray gun.
• Flexible electrode: Applies the charge at the material nozzle and supports consistent electrostatic performance.
• VM 5000 controller: Manages high voltage, current limitation, operating settings, and electrostatic-system monitoring.
• Grounding supervision: The controller switches off high voltage if the gun’s grounding connection is interrupted.
• Matched round-spray components: The R15 nozzle insert and ACR 5000 adapter work together to produce the focused round pattern.

GM 5000EAC Performance

• Application technology: Electrostatic AirCoat
• Spray pattern: Round spray
• Maximum gun material pressure: 3,626 PSI (250 bar)
• Gun weight: Approximately 710 grams
• Hose configuration: Standard resistance
• Hose length: 25 feet (7.5 meters)
• Coating type: Compatible low-conductivity solvent-borne coatings
• Approval configuration: FM package

Where Round Spray Makes a Difference

A round-spray nozzle produces a concentrated pattern that can be directed around narrow or irregularly shaped parts. This makes it particularly useful when a wide fan pattern would spray beyond the workpiece or make controlled application difficult.

Electrostatic attraction can further improve coating placement on properly grounded conductive parts. The combined effect helps the operator coat edges, curved surfaces, tubing, and complex shapes while controlling material use.

Recommended Applications

• Metal tubing, pipe, and structural frames
• Railings, racks, and fabricated assemblies
• Machinery components and industrial equipment
• Automotive, truck, trailer, and transportation components
• Agricultural and construction equipment parts
• Narrow workpieces, edges, corners, and complex shapes
• Conductive metal components requiring wraparound coverage
• Compatible wood products prepared for electrostatic application
• Manual production lines using compatible solvent-borne coatings

Complete Standard-Resistance Gun Package

• GM 5000EAC-FM electrostatic AirCoat spray gun: Part number 2344473
• VM 5000 electrostatic controller: Part number 2344480
• 25-foot standard-resistance hose package: Part number 2339171
• R15 round-spray nozzle insert: Part number 132724
• ACR 5000 round-jet nozzle adapter: Part number 2354486

Important: This package does not include the material pump, fluid-pressure regulator, pump air controls, material-supply equipment, or other components required to create a complete operating spray system.

Standard-Resistance Configuration

Model 2396201 includes the standard-resistance hose package for compatible low-conductivity solvent-borne coatings. The coating’s electrical resistance must be measured or confirmed before selecting the standard-resistance package.

A separate low-resistance round-spray package is available for coatings requiring that configuration. Do not select a package based only on whether the coating is described as solvent-borne. The coating’s measured electrical properties determine the correct hose and system configuration.

Material-Delivery Equipment Required

The GM 5000EACR requires a compatible high-pressure material-delivery system. The selected pump must provide sufficient flow and pressure for the coating, nozzle, hose length, production rate, and operating conditions.

Additional equipment may include:

• Compatible pneumatic high-pressure pump
• Material-pressure regulator
• Pump air-control assembly
• Fluid filter appropriate for the selected nozzle
• Material suction or supply system
• Properly rated fluid hoses and fittings
• Clean, dry, regulated atomizing air
• Approved grounding equipment

Match the System to the Coating

This standard-resistance package is intended for compatible low-conductivity solvent-borne coatings. Before ordering, confirm the coating’s electrical resistance, viscosity, chemical compatibility, required fluid pressure, and desired material flow.

Successful electrostatic spraying also requires proper workpiece grounding, compatible material-delivery equipment, clean compressed air, suitable ventilation, approved fire protection, and an appropriately designed spray area.

Follow the current WAGNER operating manual and all applicable fire, electrical, environmental, occupational-safety, and hazardous-location requirements.

Precision Has a Way of Paying for Itself

A finishing system earns its place by doing the same important things shift after shift: controlling the coating, helping the operator work efficiently, and producing results worthy of the product. The WAGNER GM 5000EACR-FM round-spray package is built with that purpose in mind.

Explore Financing

Get the finishing equipment your operation needs while preserving working capital. Click the Approve icon on the product page to review available financing options and apply.

Order WAGNER GM 5000EACR-FM standard-resistance package 2396201 today with free shipping, or call 817-490-1777 to discuss coating resistance, pump selection, grounding, and complete system requirements.