WAGNER Sprint 2 MPS F USA Manual Powder Coating Set 2467124

Professional Manual Powder Application with Precise Digital Control

The WAGNER Sprint 2 MPS F USA manual powder coating set (2467124) provides the core application components needed to build a professional manual powder coating system. It combines proven WAGNER technology with intelligent digital controls designed to improve application consistency, operator control, and surface quality.

At the center of the system is the lightweight WAGNER PEM-X1 manual corona powder gun. Working with the WACON Sprint 2 X digital controller and compatible powder injector, the gun provides controlled electrostatic charging and dependable powder delivery for industrial finishing applications.

The integrated Digital Surface Optimizer helps reduce overcharging effects such as excessive edge build, orange-peel tendencies, and back spray. This additional control is especially useful when coating complex parts, recesses, undercuts, and challenging powder materials.

Build a more precise and productive manual powder coating system. Order WAGNER part 2467124 today, or call 817-490-1777 for pricing and system-configuration assistance.

Features and Benefits

• PEM-X1 manual powder gun: Delivers controlled electrostatic powder application while its lightweight, balanced design helps reduce operator fatigue.
• WACON Sprint 2 X controller: Provides an intuitive digital interface for adjusting and managing important powder coating parameters.
• Digital Surface Optimizer: Helps reduce overcharging effects and supports a more homogeneous finish on complex parts and challenging geometries.
• Controlled powder delivery: The coordinated gun, injector, and controller support a consistent powder cloud and repeatable application.
• Improved penetration: Properly adjusted DSO settings can support powder penetration into recesses, undercuts, and difficult-to-reach areas.
• Consistent film build: Accurate powder and electrostatic adjustments help the operator maintain more uniform coverage across production parts.
• Reproducible settings: Digital controls make established application parameters easier to repeat when recurring jobs return to production.
• Efficient powder application: Precise control can help reduce unnecessary powder output and improve powder use when the system is properly configured.
• Operator-friendly controls: Clearly arranged functions simplify adjustment while keeping important coating parameters readily accessible.
• Flexible system foundation: Compatible WAGNER powder-feed equipment, accessories, nozzles, and mounting options allow the set to be configured for different applications.

PEM-X1 Manual Powder Gun

The PEM-X1 combines lightweight handling with the durability needed for regular industrial use. Its balanced construction helps the gun sit naturally in the operator’s hand, supporting accurate movement and consistent spray distance during extended coating sessions.

The gun produces a controlled powder cloud for coating flat surfaces, edges, recesses, and complex components. Gun-mounted controls allow the operator to make convenient application adjustments without repeatedly returning to the control unit.

WACON Sprint 2 X Digital Control

The WACON Sprint 2 X controller provides centralized control of important electrostatic and powder-delivery parameters. Its intuitive interface helps operators establish settings for different powders, part geometries, film-thickness requirements, and production conditions.

Repeatable settings help reduce guesswork during setup and make it easier to maintain consistent application when the same product returns for another production run.

Digital Surface Optimizer

The Digital Surface Optimizer provides additional control over electrostatic charging. It can help reduce powder overcharging that may contribute to excessive edge build, back spray, and uneven surface appearance.

DSO is particularly useful when coating complex components, recessed areas, undercuts, highly chargeable powders, or parts requiring shorter spray distances. When properly adjusted, it supports more uniform powder deposition and a more homogeneous finish.

Final coating quality also depends on powder properties, pretreatment, part grounding, spray distance, operator technique, applied film thickness, oven conditions, and the powder manufacturer’s cure schedule.

Recommended Applications

• General industrial powder coating
• Metal fabrication and custom finishing
• Machinery and equipment components
• Automotive and transportation parts
• Metal furniture, shelving, and storage products
• Architectural metal components
• Electrical cabinets and industrial enclosures
• Frames, brackets, panels, and fabricated assemblies
• Small-batch and production powder coating
• Manual touch-up and specialty coating work
• Complex components requiring controlled electrostatic charging

Core Manual Powder Set Components

• WAGNER PEM-X1 manual electrostatic powder gun
• WACON Sprint 2 X digital control unit
• Compatible powder injector
• Required gun and controller connections included with the selected package configuration

Important: The Sprint 2 MPS is a core manual powder application set and may not include every component required for operation. Confirm the exact contents of part number 2467124 before ordering.

A compatible powder-feed source, powder hose, injector connections, mounting equipment, compressed-air preparation, electrical supply, grounding equipment, booth, recovery system, and other accessories may be required.

Configure the System for Your Application

The proper powder-feed arrangement, nozzle, electrode, hose length, controller settings, and accessory selection depend on the powder material, part geometry, required finish, production volume, and frequency of color changes.

Our finishing specialists can help determine whether part number 2467124 contains the correct components for your application and identify any additional equipment needed to complete the system.

Safe Powder Coating Operation

Electrostatic powder coating requires clean, dry, regulated compressed air, effective workpiece grounding, suitable electrical service, and an approved powder coating booth or application area.

Always follow current WAGNER operating, grounding, cleaning, maintenance, and safety instructions. The installation must also comply with applicable fire, electrical, ventilation, environmental, and hazardous-location requirements.

Explore Financing

Invest in professional powder coating equipment while preserving your company’s working capital. Flexible financing may be available for the Sprint 2 MPS and additional components required to complete your manual powder coating system.

Select the “Approve” emblem on the product page to review available financing options and apply online.

Better Control Builds a Better Finish

The WAGNER Sprint 2 MPS F USA gives professional powder coaters the precise digital controls, dependable application performance, and configuration flexibility needed to produce consistent results.

Order WAGNER Sprint 2 MPS F USA part 2467124 today. Call 817-490-1777 to confirm package contents, request pricing, and complete your manual powder coating system.