Titan PowrCoat™ 745 Pneumatic Airless Sprayer – Cart Model 0533745C

Heavy-duty performance for the toughest industrial coating jobs.

When the work is hard, the hours are long, and the coating does not cut you any slack, you need a sprayer built for serious production. The cart-mounted Titan PowrCoat 745 delivers the pressure, output, and durability required for demanding protective-coating applications.

Part of Titan’s Severe Service™ line, the PowrCoat 745 is engineered to provide longer service life with less maintenance. Its rugged pneumatic design moves high-solids and protective coatings while helping industrial crews reduce downtime and maintain dependable production.

Stop fighting underbuilt equipment. Put the strength of the Titan PowrCoat 745 behind your next job.

Performance Highlights

• 45:1 pneumatic pressure ratio
• Maximum operating pressure of 4,500 PSI
• Maximum recommended output of 2.8 gallons per minute
• Severe Service™ fluid section with self-adjusting packings
• Hard-chrome-plated piston rod and cylinder
• Integrated air-preparation and lubrication components
• Heavy-duty cart built for industrial environments

Built for Severe Service

The PowrCoat 745 is built for coating operations where durability is not optional. Its Severe Service™ fluid section uses self-adjusting packings to support consistent sealing and reduce routine packing adjustments.

The piston rod and cylinder feature Titan’s hard-chrome-plated wear surfaces. The hard, low-friction finish helps the pump withstand demanding production conditions while supporting dependable cycling and longer component life.

The result is straightforward: more time spraying, less time servicing the pump, and fewer interruptions when the job is already on the clock.

Features and Benefits

• Severe Service™ fluid section: Self-adjusting packings support dependable performance while reducing routine maintenance.
• Hard-chrome wear surfaces: The plated piston rod and cylinder provide durable, low-friction operating surfaces.
• High-capacity outlet filter: Features 3/8-inch and 1/4-inch outlets with convenient filter access.
• Air-management components: Includes an air filter, moisture separator, regulator, and lubricator.
• High-output performance: Delivers up to 2.8 GPM for demanding industrial coating work.
• High-pressure capability: Produces up to 4,500 PSI for use with properly rated airless spray equipment.
• Heavy-duty cart: Provides a stable and mobile platform for production and field applications.
• Pneumatic operation: Suitable for industrial facilities where compressed air is the preferred power source.

Rugged Cart-Mount Configuration

The PowrCoat 745 is mounted on a heavy-duty cart with large 16-inch pneumatic tires for movement around plants, fabrication shops, shipyards, and industrial jobsites.

Integrated lifting handles and a heavy-duty crane hook help crews position the sprayer where it is needed. The high-capacity hose rack holds up to 200 feet of 1/2-inch hose, helping keep long production hose runs organized.

Ideal Applications

• Industrial protective coatings
• Structural steel finishing
• Corrosion-control coatings
• Marine and shipyard applications
• Tank and vessel coating
• Fabrication-shop finishing
• Plant and facility maintenance
• High-volume construction projects
• High-solids industrial coatings

Why Choose a Pneumatic Airless Sprayer?

A pneumatic airless sprayer uses compressed air to drive the pump while the coating is atomized by high fluid pressure at the spray tip. This eliminates the need for atomizing air at the gun and provides the output required for fast application of industrial coatings.

Pneumatic systems are a practical choice for production facilities with an adequate compressed-air supply. They are valued for simple operation, controllable pump speed, and dependable performance in demanding industrial environments.

Air and Fluid System Requirements

The PowrCoat 745 requires a clean, dry, regulated compressed-air supply capable of supporting the pump’s operating requirements. Air delivery must be sized for the intended pressure, flow rate, coating viscosity, hose length, and production demand.

All spray guns, hoses, fittings, filters, tips, and accessories must be rated for the maximum fluid pressure used. Always follow Titan’s current operating instructions and pressure-relief procedure.

Quick Specifications

• Manufacturer: Titan Tool
• Product family: PowrCoat
• Model: PowrCoat 745
• Part number: 0533745C
• Mounting configuration: Cart mount
• Power source: Pneumatic
• Pressure ratio: 45:1
• Maximum operating pressure: 4,500 PSI
• Maximum air-input pressure: 100 PSI
• Maximum recommended output: 2.8 GPM
• Fluid output per cycle: 114 cc
• Air-motor diameter: 7 inches
• Stroke length: 4 inches
• Approximate unit weight: 133 pounds

Explore Financing

Your investment in the PowrCoat 745 is an investment in production speed, coating quality, and long-term durability. Financing may be available to help you obtain the equipment you need while preserving working capital and maintaining cash flow.

Contact us to discuss available financing options for your business.

Built to Work When the Job Gets Tough

The PowrCoat 745 is made for professionals who cannot afford weak output, constant maintenance, or unnecessary downtime. Its Severe Service™ construction, high-pressure capability, and rugged cart configuration give industrial coating crews the dependable performance needed to keep moving.

Order the Titan PowrCoat 745 today and take control of the job with proven Titan power and reliability.