WAGNER GM 5000EAC-CE Electrostatic AirCoat Fan-Spray Package – 2396207

Professional AirCoat Atomization with Electrostatic Efficiency

The WAGNER GM 5000EAC Electrostatic AirCoat Package (2396207) combines high-pressure material delivery, supporting atomizing air, and electrostatic charging to provide controlled fan-spray application for compatible solvent-based coatings.

AirCoat fluid pressure performs much of the atomization work while supporting air helps soften, shape, and refine the spray pattern. The gun’s integrated high-voltage cascade electrically charges the coating as it leaves the nozzle, helping attract the material to a properly grounded workpiece.

When the coating conductivity, spray settings, grounding, and workpiece are properly matched, this electrostatic AirCoat spray gun can improve wraparound coverage, reduce overspray, increase transfer efficiency, and place more coating where it belongs.

Bring professional atomization, electrostatic control, and dependable WAGNER performance to your finishing operation.

AirCoat Atomization with Electrostatic Attraction

WAGNER AirCoat technology uses controlled fluid pressure for primary atomization and compressed air at the air cap to shape the spray pattern. This combination produces a soft, controllable fan pattern suited to professional industrial finishing.

The integrated electrostatic system adds another level of application efficiency. When the material and operating conditions are suitable, charged coating particles are attracted to the grounded workpiece. This effect can improve coverage around edges, tubes, frames, and other conductive shapes that can be difficult to coat efficiently with conventional spraying alone.

Features and Benefits

• Electrostatic AirCoat technology: Combines pressure-assisted atomization, supporting air, and electrostatic attraction for controlled professional finishing.
• Improved transfer efficiency: A properly configured system can help place more coating on the workpiece and reduce unnecessary material loss.
• Reduced overspray: Improved coating placement can help reduce booth loading, airborne material, cleanup requirements, and coating waste.
• Wraparound coverage: Electrostatic attraction helps coating reach edges, sides, tubes, frames, and partially concealed surfaces on suitable conductive parts.
• Soft fan-spray pattern: The matched ACF 5000 nozzle and HV Blue air cap support controlled atomization and consistent film build.
• Integrated high-voltage cascade: Generates the electrostatic charge within the spray gun for efficient manual application.
• Adjustable application control: Allows the operator to coordinate fluid pressure, atomizing air, spray-pattern settings, and electrostatic output.
• Operator-friendly design: The balanced, approximately 1.57-pound gun helps reduce fatigue during extended production spraying.
• Grounding supervision: The VM electrostatic controller monitors gun grounding and manages high-voltage operation.
• Industrial construction: Durable wetted components support regular use with compatible professional coatings.

Designed for Compatible Solvent-Based Coatings

This standard-resistance configuration is intended for compatible low-conductivity solvent-based coatings. The coating’s electrical resistance must be evaluated before the package is selected or operated. A material outside the approved conductivity range may not charge correctly or may require a different gun and hose configuration.

Compatible materials may include selected solvent-based primers, enamels, lacquers, and industrial topcoats. Coating conductivity, viscosity, chemical compatibility, required fluid pressure, desired flow rate, and atomizing-air requirements should all be confirmed before ordering.

Recommended Industrial Applications

• Metal furniture, frames, racks, and fabricated assemblies
• Industrial machinery, cabinets, enclosures, and equipment components
• Automotive, transportation, and agricultural components
• Pipes, tubular products, railings, and complex metal shapes
• Construction-equipment components and manufactured metal products
• Wood products prepared for compatible electrostatic application
• Manual production finishing requiring controlled film build
• Applications where finish quality and coating efficiency are priorities

Package Includes

• GM 5000EAC-CE electrostatic AirCoat spray gun: Part number 2309871
• VM 5000 electrostatic controller: Part number 2310477
• 25-foot standard-resistance hose package: Part number 2339171
• ACF 5000 13/40 fan-spray nozzle: Part number 395413
• ACF 5000 HV Blue air cap: Part number 2314203

Important: This is an electrostatic applicator and controller package. A compatible material pump or pressure supply, fluid regulator, pump air controls, clean compressed-air supply, grounding equipment, and other installation components may be required and are not listed as included.

Quick Specifications

Actual performance depends on coating conductivity and viscosity, fluid pressure, atomizing-air settings, nozzle and air-cap selection, workpiece geometry, grounding, booth airflow, operator technique, and the complete material-delivery configuration.

Proper Grounding and Installation Are Essential

Electrostatic performance and operator safety depend on proper grounding, ventilation, coating compatibility, and correct system installation. The operator, workpiece, material supply, spray booth, and related equipment must be evaluated according to WAGNER instructions and all applicable regulations.

Confirm coating resistance, flash-point requirements, hazardous-location requirements, air and fluid supply specifications, and the compatibility of every system component before placing the equipment into service.

View the WAGNER GM 5000EAC operating manual

Explore Financing

Acquire the electrostatic finishing equipment your operation needs while preserving working capital. Flexible financing can make it easier to invest in transfer efficiency, finish quality, and production performance.

Click the “Approve” icon on the product page to review available financing options and apply online.

Put More Coating on the Workpiece and Less into the Air

The WAGNER GM 5000EAC package brings AirCoat atomization, electrostatic attraction, and operator-focused control together in one professional finishing solution. When properly configured, it can help improve coverage, reduce coating waste, and produce the consistent finish your customers expect.

Order WAGNER GM 5000EAC package 2396207 today, or call 817-490-1777 for help confirming coating conductivity, material-delivery requirements, and complete system compatibility.