Titan Hydra X™ 7230 Roofing and Protective Coatings Sprayer – 2412277

Maximum Power for the Toughest Coating Projects

Roofing and protective-coating projects demand more than an ordinary airless sprayer. They require the power to move heavy materials, the pressure to maintain consistent production, and the durability to withstand long days under difficult jobsite conditions.

The Titan Hydra X 7230 is a high-production hydraulic airless sprayer engineered for demanding roof coatings, elastomerics, block fillers, fireproofing, waterproofing materials, and other heavy-bodied coatings.

At the center of the Hydra X 7230 is Titan’s HydraStroke® Technology, an electronically controlled hydraulic system designed to deliver dependable power and consistent performance. Its Severe Service™ fluid section combines a slow-stroking 5-inch piston with durable Tri-Chrome construction to resist corrosion and abrasion caused by aggressive coatings.

The electric AutoLift™ system raises and lowers the fluid section at the touch of a button, making drum changes faster and reducing manual lifting. A quick-removal fluid-section design also allows one person to service or change the fluid section at the jobsite.

Important: Model 2412277 is not for sale in California.

Put serious hydraulic power behind your largest roofing and protective-coating projects with the Titan Hydra X 7230.

Features and Benefits

• HydraStroke® Technology: Electronically controlled hydraulics provide dependable power and consistent performance for demanding airless applications.
• Optimized Hydraulic Motor: A hydraulic motor with only one moving part helps reduce heat and extend operating life.
• Severe Service™ Fluid Section: The slow-stroking 5-inch piston maximizes pumping power and helps extend fluid-section life.
• Tri-Chrome Construction: Durable fluid-section surfaces resist corrosion and abrasion caused by aggressive coatings.
• Electric AutoLift™ System: Raises and lowers the fluid section at the touch of a button for easier, cleaner, and faster drum changes.
• Quick-Removal Fluid Section: Allows one person to remove or service the fluid section at the jobsite, helping minimize downtime.
• Modular Pump Design: Allows contractors to change sprayer performance by installing a compatible alternate fluid section.
• Heavy- and Light-Coating Versatility: Handles materials with different viscosities without relying on a mechanical clutch.
• Multiple-Gun Capability: Supports as many as five spray guns when properly configured for the coating, tip sizes, hoses, and required output.
• Dual-Fan Cooling System: Maximizes airflow across the hydraulic system to help manage heat during extended production.
• Six-Gallon Hydraulic Reservoir: Supports dependable operation throughout demanding coating projects.
• Large Pneumatic Tires: Heavy-duty 12-inch tires make the sprayer easier to move across challenging jobsites.

Designed for Heavy Coatings

The Titan Hydra X 7230 is designed for professional applications where smaller airless sprayers may not provide sufficient material delivery, pressure, or durability.

• Elastomeric roof coatings
• Commercial roof-restoration materials
• High-build protective coatings
• Block fillers
• Fireproofing materials
• Waterproofing and weather-barrier coatings
• Heavy-bodied architectural coatings
• Large industrial and commercial coating projects

Material compatibility and achievable production depend on the coating formulation, viscosity, temperature, preparation, hose diameter and length, spray-tip selection, number of guns, and complete system configuration. Confirm the application requirements before ordering.

High-Production Hydraulic Performance

Large coating projects become expensive when equipment cannot maintain production. The Hydra X 7230 combines electronically controlled hydraulic power, a slow-stroking fluid section, effective heat management, and jobsite serviceability to help professional crews reduce interruptions and complete more work.

The modular fluid-section design adds another level of versatility. By installing the appropriate compatible fluid section, contractors can configure the same hydraulic platform for different performance requirements and coating applications.

System Configuration

The spray guns, high-pressure fluid hoses, whip hoses, spray tips, fittings, manifolds, and other accessories must be selected for the coating, operating pressure, number of guns, and required production rate.

All fluid-handling components must be compatible with the coating and rated for the maximum pressure used. Confirm the included equipment and complete spraying configuration before placing your order.

Explore Financing

The Titan Hydra X 7230 is an investment in production capacity, coating quality, and dependable service. Flexible financing options may be available to help you acquire the equipment your company needs while preserving working capital and maintaining cash flow.

Click the “Approve” emblem on the product page to review available financing options and apply online.

Take Control of Your Biggest Coating Projects

The Titan Hydra X 7230 provides the hydraulic power, heavy-material capability, durability, and serviceability professional contractors need for large roofing and protective-coating applications.

Order the Titan Hydra X 7230 model 2412277 today and bring high-production performance to your toughest coating projects.