WAGNER IceBreaker Puma 21-110 High-Pressure Piston Pump

High-flow AirCoat performance for automated and multi-gun finishing systems.

The WAGNER IceBreaker Puma 21-110 is a stainless-steel pneumatic piston pump engineered for professional AirCoat applications. Its combination of high material delivery, controlled pressure, and multi-gun capability makes it an excellent choice for industrial finishing systems and automated flatbed coating machines.

With a 21:1 pump ratio, maximum material pressure of 2,437 PSI (168 bar), and maximum delivery rate of 1.74 GPM (6.6 liters per minute), the Puma 21-110 provides the output required to supply multiple spray guns while maintaining a uniform, low-pulsation material flow.

Bring dependable WAGNER material delivery to your production line. Call 817-490-1777 to discuss your application.

Performance Highlights

• Pump ratio: 21:1
• Maximum material pressure: 2,437 PSI (168 bar)
• Maximum material delivery: 1.74 GPM (6.6 liters per minute)
• Fluid displacement: 110 cc per double stroke
• Maximum stroke rate: 60 double strokes per minute
• Air-inlet pressure: 2.5–8 bar
• Fluid-section material: Stainless steel
• Packing configuration: PE/TG
• Application technology: AirCoat
• Configuration: Bare pneumatic piston pump

Multiple-Gun Capability

The Puma 21-110 is designed to supply multiple spray guns in properly engineered production-finishing systems.

• Supports up to 12 guns with 0.009-inch tips
• Supports up to 5 guns with 0.013-inch tips
• Supports up to 3 guns with 0.017-inch tips

Actual gun capacity depends on coating viscosity, operating pressure, hose length, hose diameter, spray-tip selection, available compressed-air volume, and the complete system configuration.

Features and Benefits

• High-flow material delivery: Output up to 1.74 GPM supports multiple spray guns and demanding industrial production rates.
• 21:1 pressure ratio: Provides controlled material pressure for professional AirCoat atomization and finish quality.
• Multi-gun production capability: Allows one properly configured pump to supply several automatic or manual spray guns.
• Uniform, low-pulsation flow: Delivers a steady material supply that supports consistent atomization and uniform coating application.
• IceBreaker air-motor design: Helps prevent power losses caused by icing during continuous industrial operation.
• Stainless-steel fluid section: Provides durable material-contact surfaces suitable for compatible waterborne and solvent-borne materials.
• Self-adjusting PE/TG packings: Help maintain dependable sealing performance while reducing routine packing adjustments.
• Broad material compatibility: Suitable for many compatible waterborne, solvent-borne, abrasive, and moisture-sensitive materials.
• Ergonomically integrated controls: Operating elements are grouped within the compact maintenance unit for convenient adjustment and operation.
• Accessible separating-agent chamber: Simplifies routine inspection and maintenance of the fluid section.
• Replaceable packing system: Helps reduce service time when packing maintenance becomes necessary.
• Independent fluid-section removal: The fluid section can be disassembled for service without removing or dismantling the air motor.

Designed for Professional AirCoat Systems

AirCoat technology combines controlled fluid pressure with atomizing air at the spray gun. This supports fine atomization, controlled spray patterns, and professional surface quality when the pump, gun, nozzle, air supply, and other components are properly matched.

The Puma 21-110 supplies the material pressure and volume required for single-station, multi-gun, and automated AirCoat systems. Its high delivery rate makes it particularly useful where several guns must receive a stable material supply at the same time.

Ideal for Flatbed Coating Machines

The Puma 21-110 is well suited for flatbed finishing machines used to coat panels and other flat components. Its multi-gun capacity allows a properly configured system to feed several spray guns positioned across the working width of the machine.

Uniform, low-pulsation material delivery helps maintain consistent coating application from gun to gun, supporting repeatable production results across the coated surface.

Recommended Applications

• Automated flatbed coating machines
• Industrial wood finishing
• Furniture and cabinet manufacturing
• Doors, panels, and architectural millwork
• Industrial metal finishing
• Machinery and equipment components
• Production coating lines
• Automatic AirCoat installations
• Manual multi-gun AirCoat systems
• Adhesive applications
• Release-agent applications

Bare-Pump Configuration

This product is supplied as a bare pump. Mounting equipment, air controls, outlet filtration, material-supply components, hoses, spray guns, tips, and other accessories must be selected separately.

Available system accessories include:

• Wall-mount bracket
• Mobile cart
• Air-control assembly
• High-pressure outlet filter
• Pressure-release assembly
• Siphon hose
• Properly rated fluid hoses and fittings
• Compatible WAGNER AirCoat spray guns
• Application-specific air caps and spray tips

System Requirements

The Puma 21-110 requires a properly sized supply of clean, dry, regulated compressed air. Available air pressure and volume must be sufficient for the desired fluid pressure, material-delivery rate, number of spray guns, coating viscosity, hose arrangement, and production requirements.

All fluid hoses, filters, fittings, spray guns, air caps, tips, and accessories must be compatible with the coating and rated for the pump’s maximum material pressure. Always follow current WAGNER instructions covering installation, grounding, operation, pressure relief, cleaning, and maintenance.

Operating Manual

View the WAGNER IceBreaker operating manual

Configure the Right Pumping System

Proper pump and accessory selection depends on the coating, required production rate, number of spray guns, tip sizes, hose lengths, application method, and available compressed-air supply. Our team can help identify the components required for a properly configured Puma 21-110 system.

Call 817-490-1777 to discuss your pumping application and configure the WAGNER IceBreaker Puma 21-110 for your production requirements.