C.A. Technologies CAT-X-B E-Pack
Step Up and Spray Like You Mean It
When you saddle up with the CAT-X-B E-Pack, you are not simply picking up another spray gun. You are putting a precision-engineered finishing tool in your hand—one that is ready to work from the first pull of the trigger. This complete package gives professional finishers the equipment needed to start quickly, spray cleanly, and maintain control across a wide range of coatings.
Performance Highlights
- Professional HVLP performance for controlled manual coating applications
- Transfer efficiency of 65% or better when properly adjusted and operated
- 12-point plenum nozzle design for smooth, consistent atomization
- Stainless-steel wetted components for corrosion resistance and dependable service
- Lightweight 20-ounce spray gun designed to reduce operator fatigue
- Multiple needle and nozzle sizes for greater coating flexibility
Professional Control in a Complete Package
The CAT-X-B E-Pack brings professional spray performance to automotive, wood, metal, wheel, and general industrial finishing. Its 12-point plenum nozzle helps produce consistent atomization and an even spray pattern, while the gravity-feed design provides responsive material delivery and control.
Three included needle and nozzle setups allow the operator to match the gun more closely to the coating and desired finish. Whether the job involves primers, basecoats, clear coats, or compatible specialty coatings, the CAT-X-B gives the finisher room to make the right adjustment.
The included 650 mL PPS cup system helps simplify material preparation and cleanup. Disposable lids and liners reduce the amount of solvent and time required during coating changes, allowing the operator to spend more time spraying and less time cleaning equipment.
Features and Benefits
-
Consistent atomization: The 12-point plenum nozzle supports a smooth, uniform spray pattern.
-
Efficient coating application: HVLP-compliant performance helps reduce overspray and material waste.
-
Three fluid setups: Includes 1.3 mm, 1.4 mm, and 1.5 mm needle and nozzle combinations.
-
Two air caps: Provides additional flexibility when matching atomization to the coating and application.
-
Stainless-steel fluid passages: Helps resist corrosion and supports solvent-based and compatible waterborne coatings.
-
Lightweight construction: The compact 20-ounce gun helps reduce fatigue during extended spraying.
-
PPS cup system: Supports faster material changes and more efficient cleanup.
-
Serviceable design: Included tools support normal setup, adjustment, and maintenance.
Recommended Applications
- Automotive refinishing
- Wheel and custom-part coating
- Wood furniture and cabinet finishing
- Metal fabrication and component finishing
- Primers, basecoats, and clear coats
- Compatible industrial and specialty coatings
What Is Included
- CAT-X-B gravity-feed spray gun
- Three needle and nozzle sets: 1.3 mm, 1.4 mm, and 1.5 mm
- Two air caps
- 650 mL PPS cup
- Three PPS lids and liners
- Adjustment and maintenance tools
- Wrench kit
Quick Specifications
|
Product type
|
Manual gravity-feed air spray gun package
|
|
Application technology
|
HVLP and HVLP-Plus manual coating
|
|
Included nozzle sizes
|
1.3 mm, 1.4 mm, and 1.5 mm
|
|
Available nozzle range
|
0.8 mm to 2.2 mm
|
|
Gun weight
|
20 oz
|
|
Cup capacity
|
650 mL
|
|
Wetted components
|
Stainless steel
|
|
Atomizing-air connection
|
1/4-inch NPSM
|
|
Transfer efficiency
|
65% or better when properly adjusted and operated
|
A Professional Finish Earned One Trigger Pull at a Time
The CAT-X-B E-Pack is a reliable, precision-built partner that earns its place in the shop. It gives the operator control, coating flexibility, and dependable atomization without carrying unnecessary weight. That is honest performance—and the kind of equipment that would make the Duke tip his hat.
Order the C.A. Technologies CAT-X-B E-Pack today, or call
817.490.1777
for help confirming the best needle, nozzle, and air-cap setup for your coating.
