C.A. Technologies Lynx, CSLP and CPR Repair Kit 10-106
Restore dependable performance to compatible C.A. Technologies Lynx, CSLP, and CPR spray guns with the genuine 10-106 repair kit. This model-specific kit provides commonly serviced internal components needed to correct problems caused by normal wear and regular production use.
Fix the wear, stop the leaks, and put your C.A. Technologies spray gun back to work.
Performance Highlights
- Compatible with multiple C.A. Technologies Lynx spray guns
- Designed for CSLP and CPR spray gun models
- Helps replace commonly worn internal components
- Supports proper air and fluid sealing
- Helps restore dependable triggering and gun operation
- Genuine C.A. Technologies repair kit
Restore Reliable Spray Gun Performance
Production spray guns are exposed to repeated triggering, coating materials, flushing solvents, and regular cleaning. Over time, this use can wear seals, gaskets, O-rings, springs, and other internal service components.
When these parts begin to wear, the spray gun may develop air leakage, fluid seepage, sluggish triggering, poor shutoff, or inconsistent spray performance. The C.A. Technologies 10-106 repair kit provides model-matched service components to help restore reliable operation and extend the useful life of the gun.
Features
- Model-specific spray gun repair kit
- Compatible with selected Lynx, CSLP, CPR, and H2O-CPR guns
- Supports the rebuilding of commonly serviced internal areas
- Designed for proper fit and dependable sealing
- Suitable for routine and preventive maintenance
- Convenient alternative to ordering service components individually
- C.A. Technologies part number 10-106
Benefits
- Reduce downtime: Keep the correct repair kit available for scheduled service or unexpected maintenance.
- Control leakage: Replace worn components that may allow compressed air or coating material to escape.
- Restore dependable triggering: Properly serviced internal parts help the gun respond and shut off correctly.
- Maintain finish quality: A correctly operating spray gun supports repeatable atomization and coating control.
- Extend equipment life: Routine rebuilding can keep a proven spray gun in productive service longer.
Compatible Lynx Spray Guns
- Lynx 100H, L100H
- Lynx 200H, L200H
- Lynx 300H, L300H
- Lynx 100C, L100C
- Lynx 200C, L200C
- Lynx 300C, L300C
- Lynx 100C Multicolor
- Lynx 100CM Multicolor Touch-Up
- Lynx 100CVT Abrasives
- Lynx 100C x 1590 Waterborne
Additional Compatible Spray Guns
- C.A.T. SLP, CSLP Stainless Low Pressure
- CAT Pressure Reduced, CPR
- H2O CAT Pressure Reduced, H2O-CPR
Important: Confirm the complete model designation on your spray gun before ordering. C.A. Technologies repair kits are model-specific, and similar guns may require a different repair kit.
Common Applications
- Industrial wood finishing
- Cabinet and furniture production
- Fine-finish coating applications
- Waterborne finishing systems
- Multicolor spray applications
- Abrasive coating applications
- Metal finishing operations
- Preventive maintenance departments
When to Rebuild Your Spray Gun
Inspect or service the spray gun when you notice air leakage, fluid seepage, sluggish triggering, incomplete shutoff, reduced adjustment control, or irregular spray performance. Maintenance frequency depends on the coating material, production volume, operating pressure, flushing practices, and cleaning chemicals used.
Repair Kit Contents
Spray gun repair kits typically contain selected seals, gaskets, O-rings, springs, and other model-specific service components. Review the current C.A. Technologies parts diagram for your exact spray gun to confirm the contents of kit 10-106 and the correct installation procedure before beginning service.
Installation and Service
Shut down the finishing system and completely relieve all air and fluid pressure before disassembling the spray gun. Clean the gun exterior first to prevent coating residue from entering internal passages.
Inspect the fluid needle, fluid nozzle, air valve, sealing surfaces, and related components for wear or damage. Install and lubricate replacement components only as directed by the current C.A. Technologies service instructions.
After reassembly, test the gun at a safe pressure and confirm proper triggering, shutoff, adjustment, and sealing before returning it to production.
Quick Specifications
- Manufacturer: C.A. Technologies
- Product type: Spray gun repair kit
- Part number: 10-106
- Compatible families: Lynx, CSLP, CPR, and H2O-CPR
- Application: Spray gun maintenance and rebuilding
Keep Your Finishing Equipment Producing
A worn spray gun can slow production, waste coating material, and compromise finish quality. Keep the C.A. Technologies 10-106 repair kit available so your maintenance team can service compatible Lynx, CSLP, and CPR spray guns and return them to operation quickly.
Order the C.A. Technologies Lynx, CSLP and CPR Repair Kit 10-106 today, or contact us for help confirming compatibility.
