C.A. Technologies Jaguar, JSLP and CPR-G Repair Kit 10-105
Restore dependable performance to compatible C.A. Technologies Jaguar, JSLP, CPR-G, and H2O-CPR-G spray guns with the genuine 10-105 repair kit. This model-specific kit provides commonly serviced internal components needed to address normal wear and keep your finishing equipment working properly.
Fix the wear, stop the leaks, and put your C.A. Technologies spray gun back to work.
Performance Highlights
- Compatible with multiple C.A. Technologies Jaguar spray guns
- Designed for Jaguar SLP, CPR-G, and H2O-CPR-G models
- Helps replace commonly worn internal service components
- Supports proper air and fluid sealing
- Helps restore dependable triggering and spray performance
- Genuine C.A. Technologies repair kit
Restore Reliable Spray Gun Operation
Production spray guns are exposed to repeated triggering, coating materials, flushing solvents, and regular cleaning. Over time, this use can wear seals, gaskets, O-rings, springs, and other internal service components.
When these components begin to wear, the spray gun may develop air leakage, fluid seepage, sluggish triggering, incomplete shutoff, or inconsistent spray performance. The C.A. Technologies 10-105 repair kit provides model-matched components to help restore dependable operation and extend the useful life of the gun.
Features
- Model-specific spray gun repair kit
- Compatible with selected Jaguar, JSLP, CPR-G, and H2O-CPR-G guns
- Supports the rebuilding of commonly serviced internal areas
- Designed for proper fit and dependable sealing
- Suitable for routine and preventive maintenance
- Convenient alternative to ordering service components individually
- C.A. Technologies part number 10-105
Benefits
- Reduce downtime: Keep the correct repair kit available for scheduled service or unexpected spray gun maintenance.
- Control leakage: Replace worn components that may allow compressed air or coating material to escape.
- Restore dependable triggering: Properly serviced internal components help the gun respond and shut off correctly.
- Maintain finish quality: A correctly operating spray gun supports repeatable atomization and coating control.
- Extend equipment life: Routine rebuilding can keep a proven spray gun in productive service longer.
Compatible Jaguar Spray Guns
- Jaguar 100H, J100H
- Jaguar 300H, J300H
- Jaguar 100C Gelcoat, J100C
- Jaguar 100CVT Abrasives, J100CVT
- Jaguar 300C, J300C
- Jaguar SLP Stainless Low Pressure, JSLP
Additional Compatible Spray Guns
- CAT Pressure Reduced Gravity, CPR-G
- H2O CAT Pressure Reduced Gravity, H2O-CPR-G
Important: Confirm the complete model designation on your spray gun before ordering. C.A. Technologies repair kits are model-specific, and similar Jaguar or CPR configurations may require a different kit.
Common Applications
- Industrial wood finishing
- Cabinet and furniture production
- Fine-finish coating applications
- Gelcoat spraying
- Abrasive coating applications
- Waterborne finishing systems
- Gravity-feed spraying
- Preventive maintenance departments
When to Rebuild Your Spray Gun
Inspect or service the spray gun when you notice air leakage, fluid seepage, sluggish triggering, incomplete shutoff, reduced adjustment control, or irregular spray performance. Maintenance frequency depends on the coating material, production volume, operating pressure, flushing practices, and cleaning chemicals used.
Repair Kit Contents
Spray gun repair kits typically contain selected seals, gaskets, O-rings, springs, and other model-specific service components. Review the current C.A. Technologies parts diagram for your exact spray gun to confirm the contents of kit 10-105 and the correct installation procedure before beginning service.
Installation and Service
Shut down the finishing system and completely relieve all air and fluid pressure before disassembling the spray gun. Clean the gun exterior first to prevent coating residue from entering internal passages.
Inspect the fluid needle, fluid nozzle, air valve, sealing surfaces, and related components for wear or damage. Install and lubricate replacement parts only as directed by the current C.A. Technologies service instructions.
After reassembly, test the gun at a safe pressure and confirm proper triggering, shutoff, adjustment, and sealing before returning it to production.
Quick Specifications
- Manufacturer: C.A. Technologies
- Product type: Spray gun repair kit
- Part number: 10-105
- Compatible families: Jaguar, JSLP, CPR-G, and H2O-CPR-G
- Application: Spray gun maintenance and rebuilding
Keep Your Finishing Equipment Producing
A worn spray gun can slow production, waste coating material, and compromise finish quality. Keep the C.A. Technologies 10-105 repair kit available so your maintenance team can service compatible Jaguar, JSLP, and CPR-G spray guns and return them to operation quickly.
Order the C.A. Technologies Jaguar, JSLP and CPR-G Repair Kit 10-105 today, or contact us for help confirming compatibility.
