WAGNER Puma 28-40 Cart-Mounted AirCoat Spray Pack – 2393653

High-Pressure AirCoat Performance with Shop and Jobsite Mobility

Professional finishing depends on more than pressure. It requires steady material delivery, controlled atomization, and equipment that performs consistently throughout the working day.

The WAGNER Puma 28-40 Cart-Mounted IceBreaker AirCoat Spray Pack (2393653) brings those qualities together in a complete, mobile finishing system. It combines a high-pressure pneumatic piston pump, GM 4700AC spray gun, AirCoat regulator, fluid filtration, material-supply components, and twin air and fluid hose set.

At the heart of the package is the WAGNER Puma 28-40 high-pressure piston pump. Its 28:1 pressure ratio produces up to approximately 3,249 PSI (224 bar), while material delivery up to 0.64 GPM (2.4 liters per minute) provides the controlled pressure and flow required for professional AirCoat and compatible Airless applications.

Mounted on a durable mobile trolley, the system can be positioned where it is needed without permanently attaching the pump to a wall or finishing line. This makes the spray pack a practical choice for professional shops, flexible production areas, and applications where equipment mobility is important.

Bring dependable WAGNER pressure, mobility, and application control to your finishing operation. Order model 2393653 or call 817-490-1777 for configuration assistance.

Why Choose the Puma 28-40 Spray Pack?

• 28:1 pressure ratio: Generates professional fluid pressure for compatible AirCoat and Airless coatings.
• Controlled material delivery: Provides up to 0.64 GPM for consistent manual and production finishing.
• Low-pulsation material flow: Supports stable atomization, controlled spray patterns, and repeatable finish quality.
• IceBreaker air-motor technology: Helps reduce ice formation and related air-motor interruptions under demanding operating conditions.
• Self-adjusting packings: Support dependable sealing while reducing routine packing adjustments.
• Durable fluid section: Uses stainless-steel and hard-chrome material-contact surfaces for demanding professional applications.
• Anti-stalling pilot valve: Receives full air pressure to support fast pump reversals and steady operation.
• High-pressure fluid filter: Helps capture contaminants before they reach the spray gun and tip.
• Complete AirCoat system: Combines the primary pump, gun, regulator, filtration, hose, and material-supply components in one package.
• Mobile cart configuration: Makes the complete spray system easier to move, position, organize, and service.

Professional AirCoat Finish Quality

WAGNER AirCoat technology combines pressure-assisted material delivery with supporting atomizing air. Fluid pressure performs much of the atomization work while the air cap helps soften, shape, and refine the spray pattern.

When the spray gun, air cap, tip, fluid pressure, and atomizing-air pressure are properly matched to the coating, this combination provides a soft, controllable spray pattern, efficient material transfer, and professional surface quality.

Reliable Material Delivery

The Puma 28-40 provides a consistently uniform material flow with particularly low pulsation. Stable fluid delivery helps the GM 4700AC maintain a predictable spray pattern and reduces pressure fluctuations that could affect the finished surface.

The IceBreaker air-motor design helps prevent power losses associated with ice formation, supporting dependable performance during extended production and finishing sessions.

Flexible Material Compatibility

The Puma 28-40 fluid section is manufactured with stainless-steel and other durable material-contact components. It can process compatible waterborne, solvent-borne, and moisture-sensitive materials when properly configured.

Material compatibility must be confirmed for the complete system, including the pump packings, suction assembly, filter, hoses, fittings, spray gun, air cap, and spray tip.

Ideal Applications

• Cabinets, furniture, doors, and architectural millwork
• Wood products and commercial furniture components
• Metal products, fabricated components, and machinery
• Commercial and industrial product finishing
• Stains, sealers, lacquers, primers, and compatible topcoats
• Waterborne and solvent-borne coatings when properly configured
• Manual finishing stations and professional spray booths
• Individual production-coating workstations
• Applications requiring controlled material delivery
• Finishing areas where equipment mobility and service access are important

Complete Spray Pack Includes

• WAGNER Puma 28-40 PE/TG pump: Part number 2329467
• Four-inch mobile trolley assembly: Part number 2325901
• IceBreaker AirCoat regulator: Part number 2328611
• Suction hose assembly: Part number 2324110
• High-pressure fluid-filter assembly: Part number 2329024
• GM 4700AC spray gun with air cap and tip: Model GM4700-BL413
• 25-foot twin air and fluid hose set: Part number 2309706
• Throat-seal lubricant: 250 mL container

Important: Confirm the supplied air cap, tip, fittings, filter element, and complete package configuration before ordering to ensure compatibility with your coating and finish requirements.

Quick Specifications

Actual performance depends on the coating, viscosity, spray-tip selection, air-cap configuration, hose arrangement, fluid pressure, atomizing-air settings, and available compressed-air capacity.

System Requirements

The spray pack requires a properly sized supply of clean, dry, regulated compressed air. Available compressor capacity must support the operating requirements of both the Puma pump and the GM 4700AC spray gun.

All hoses, regulators, fittings, filters, spray guns, air caps, and tips must be compatible with the coating and rated for the intended operating pressure. Always follow current WAGNER instructions covering installation, grounding, ventilation, pressure relief, operation, cleaning, and maintenance.

Configure the System for Your Finish

The correct tip, air cap, fluid pressure, atomizing-air pressure, filter element, and hose configuration depend on the material being applied and the finish your operation requires. Our finishing specialists can help confirm that the Puma 28-40 package is properly configured before shipment.

Explore Financing

Get the finishing equipment you need while preserving working capital. Flexible financing can make it easier to invest in productivity, finish quality, and dependable equipment. Click the Approve icon on the product page to review available options and apply.

Dependable Pressure. Refined Control. Professional Results.

The WAGNER Puma 28-40 Cart-Mounted Spray Pack provides the pressure, mobility, and application control serious finishing operations require.

Order WAGNER model 2393653 today with free shipping, or call 817-490-1777 for pricing and configuration assistance.