WAGNER Wildcat 18-40 Wall-Mounted AirCoat Spray Pack – 2393651

Controlled Material Delivery and Professional AirCoat Finish Quality

A fine finish does not come from pressure alone. It comes from controlled material delivery, consistent atomization, and equipment that performs reliably throughout the working day.

The WAGNER Wildcat 18-40 Wall-Mounted IceBreaker AirCoat Spray Pack (2393651) brings those qualities together in a coordinated professional finishing system. It combines a high-pressure piston pump, GM 4700AC spray gun, AirCoat regulator, high-pressure fluid filter, suction assembly, and twin hose set.

At the heart of the package is the WAGNER Wildcat 18-40 high-pressure piston pump. Its 18:1 pressure ratio produces up to approximately 2,089 PSI (144 bar), while material delivery up to 0.64 GPM (2.4 liters per minute) provides the controlled flow required for professional finishing applications.

The IceBreaker air motor and discharge-valve design help reduce ice formation and related operating interruptions. Self-adjusting packings, hard-chrome-plated stainless-steel wear surfaces, and a packing-free pilot valve support dependable service with reduced maintenance.

Bring dependable WAGNER AirCoat performance to your finishing operation. Order model 2393651 or call 817-490-1777 for configuration assistance.

Why Choose the WAGNER Wildcat 18-40 Spray Pack?

• 18:1 pump ratio: Provides controlled fluid pressure for professional AirCoat finishing.
• Professional material delivery: Delivers up to 0.64 GPM for consistent manual and production spraying.
• Low-pulsation material flow: Supports stable atomization, uniform application, and repeatable finish quality.
• IceBreaker air-motor technology: Helps reduce ice formation that can interfere with pneumatic-pump performance.
• Self-adjusting PE/TG packings: Support dependable sealing while reducing routine packing adjustments.
• Durable fluid section: Uses hard-chrome-plated stainless-steel wear surfaces for demanding professional operation.
• Anti-stalling pilot valve: Receives full air pressure to support quick pump reversals and steady operation.
• High-pressure fluid filter: Helps capture contaminants before they reach the spray gun and tip.
• Wall-mounted configuration: Keeps the system organized and off the floor while preserving valuable workspace.
• Coordinated spray package: Combines the principal pump, gun, regulator, hose, filtration, and material-supply components in one system.

Professional AirCoat Finish Quality

WAGNER AirCoat technology combines pressure-assisted fluid delivery with supporting atomizing air. Fluid pressure performs much of the atomization work while the air cap helps soften, shape, and refine the spray pattern.

When the spray gun, air cap, tip, fluid pressure, and atomizing-air pressure are properly matched to the coating, the system provides controlled application, efficient material transfer, and professional surface quality.

Uniform Material Delivery

The Wildcat 18-40 provides a consistently uniform material flow with particularly low pulsation. Stable fluid delivery helps the GM 4700AC maintain a predictable spray pattern and reduces pressure fluctuations that could affect the finished surface.

The pump’s stainless-steel fluid section is suitable for compatible waterborne and solvent-borne materials. Final compatibility should always be confirmed for the coating and complete system configuration.

Professional Finishing Applications

• Cabinets, furniture, doors, and architectural millwork
• Wood products and commercial furniture components
• Metal products, fabricated parts, and machinery components
• Stains, sealers, lacquers, primers, and compatible topcoats
• Waterborne and solvent-borne coatings when properly configured
• Compatible base materials, catalysts, and premixed plural-component coatings
• Manual production-finishing stations
• Professional spray-booth operations
• Applications requiring controlled material delivery and repeatable finish quality

Complete Spray Pack Includes

• WAGNER Wildcat 18-40 PE/TG pump: Part number 2329456
• Four-inch wall-holder assembly: Part number 2332143
• IceBreaker AirCoat regulator: Part number 2328611
• Suction hose assembly: Part number 2324110
• High-pressure fluid-filter assembly: Part number 2329024
• GM 4700AC spray gun with air cap and tip: Model GM4700-BL413
• 25-foot twin air and fluid hose set: Part number 2309706
• Throat-seal lubricant: 250 mL container

Important: Package components, air-cap selection, and spray-tip size should be confirmed before ordering to ensure compatibility with your coating and application requirements.

Quick Specifications

Actual performance depends on coating viscosity, spray-tip selection, air-cap configuration, hose arrangement, fluid pressure, atomizing-air pressure, and available compressed-air capacity.

Match the System to Your Coating

The correct pump package, spray gun, air cap, tip, hose, regulator settings, and fluid-filter element depend on the coating viscosity, required production rate, available compressed air, and desired finish quality.

Our finishing specialists can help confirm the proper Wildcat 18-40 configuration for your coating and application before shipment.

Explore Financing

Get the finishing system you need while preserving working capital. Flexible financing can make it easier to invest in productivity, finish quality, and dependable equipment. Click the Approve icon on the product page to review available options and apply.

Precision You Can Trust. Performance You Can Count On.

The WAGNER Wildcat 18-40 Wall-Mounted Spray Pack provides the controlled delivery, professional atomization, and dependable construction serious finishing work requires.

Order WAGNER model 2393651 today, or call 817-490-1777 for pricing, availability, and configuration assistance.