WAGNER Puma 28-40 Wall-Mounted AirCoat Spray Pack – 2393655

A Permanent Place for Dependable Finishing Performance

Every good finishing operation has a rhythm. Material moves steadily, pressure remains controlled, the spray pattern stays consistent, and the person holding the gun can concentrate on the finish instead of worrying about the equipment behind it.

The WAGNER Puma 28-40 Wall-Mounted IceBreaker AirCoat Spray Pack (2393655) is built to become a dependable part of that rhythm. Permanently mounted in your finishing area, it provides professional material delivery without occupying valuable production-floor space.

At the center of the system is the WAGNER Puma 28-40 high-pressure pneumatic piston pump. Its 28:1 pressure ratio produces up to approximately 3,249 PSI (224 bar), while material delivery up to 0.64 GPM (2.4 liters per minute) provides the pressure and flow required for professional AirCoat and compatible Airless applications.

Power matters, but steady and controllable power matters more. The Puma 28-40 supplies material with the consistency needed to produce a finish that looks deliberate, professional, and worthy of the work beneath it.

Build a dedicated finishing station around dependable WAGNER performance. Order model 2393655 or call 817-490-1777 for configuration assistance.

Why Choose the Puma 28-40?

• 28:1 pressure ratio: Generates professional fluid pressure for compatible AirCoat and Airless applications.
• Controlled material delivery: Provides up to 0.64 GPM for demanding manual and production finishing.
• Low-pulsation material flow: Supports stable atomization, controlled spray patterns, and repeatable finish quality.
• IceBreaker air-motor technology: Helps reduce ice formation and related pneumatic-pump interruptions.
• Self-adjusting packings: Support dependable sealing while reducing routine packing adjustments.
• Durable fluid section: Uses stainless-steel and hard-chrome material-contact surfaces for demanding professional applications.
• Anti-stalling pilot valve: Receives full air pressure to support quick pump reversals and steady operation.
• High-pressure fluid filter: Helps capture contaminants before they reach the spray gun and tip.
• Wall-mounted configuration: Creates an organized installation while keeping valuable floor space clear.
• Complete AirCoat package: Combines the primary pump, gun, regulator, filtration, hose, and material-supply components.

Professional AirCoat Control

WAGNER AirCoat technology combines pressure-assisted material delivery with supporting atomizing air. Fluid pressure performs much of the atomization work while the GM 4700AC air cap helps soften, shape, and refine the spray pattern.

When the spray tip, air cap, fluid pressure, and atomizing-air pressure are correctly matched to the coating, the system provides controlled application, efficient material transfer, and the refined surface appearance professional finishers expect.

Uniform Material Delivery

The Puma 28-40 provides consistently uniform material flow with particularly low pulsation. Stable material delivery helps the GM 4700AC maintain a predictable spray pattern and reduces pressure fluctuations that could affect the finished surface.

The IceBreaker air-motor design helps prevent power losses associated with ice formation, supporting dependable pump performance during extended production and finishing sessions.

Advantages of a Wall-Mounted System

• Keeps the pump securely positioned in the finishing area
• Preserves valuable production-floor space
• Helps organize air, fluid, and suction-hose connections
• Reduces unnecessary pump movement during operation
• Provides convenient access for inspection and routine service
• Creates a clean foundation for a dedicated spray station
• Helps maintain an organized professional finishing area

Flexible Material Compatibility

The Puma 28-40 fluid section uses stainless-steel and other durable material-contact components. It can process compatible waterborne, solvent-borne, and moisture-sensitive materials when properly configured.

Material compatibility must be confirmed for the complete system, including the pump packings, suction assembly, filter, hoses, fittings, spray gun, air cap, and spray tip.

Ideal Applications

• Cabinets, furniture, doors, and architectural millwork
• Wood products and commercial furniture components
• Metal fabrication, machinery, and industrial equipment
• Commercial and industrial product finishing
• Stains, sealers, lacquers, primers, and compatible topcoats
• Waterborne and solvent-borne materials when properly configured
• Dedicated manual finishing stations
• Professional spray-booth operations
• Individual production-coating workstations
• Applications requiring consistent material delivery

Complete Spray Pack Includes

• WAGNER Puma 28-40 PE/TG pump: Part number 2329467
• Four-inch wall-holder assembly: Part number 2332143
• IceBreaker AirCoat regulator: Part number 2328611
• Suction hose assembly: Part number 2324110
• High-pressure fluid-filter assembly: Part number 2329024
• GM 4700AC spray gun with air cap and tip: Model GM4700-BL413
• 25-foot twin air and fluid hose set: Part number 2309706
• Throat-seal lubricant: 250 mL container

Important: Confirm the supplied air cap, spray tip, fittings, filter element, and complete package configuration before ordering to ensure compatibility with your coating and finish requirements.

Quick Specifications

Actual performance depends on the coating, viscosity, spray-tip selection, air-cap configuration, hose arrangement, fluid pressure, atomizing-air settings, and available compressed-air capacity.

System Requirements

The spray pack requires a properly sized supply of clean, dry, regulated compressed air. Available compressor capacity must support the operating requirements of both the Puma pump and the GM 4700AC spray gun.

All hoses, regulators, fittings, filters, spray guns, air caps, and tips must be compatible with the coating and rated for the intended operating pressure. Always follow current WAGNER instructions covering installation, grounding, ventilation, pressure relief, operation, cleaning, and maintenance.

Match the System to Your Finish

The correct spray tip, air cap, fluid pressure, atomizing-air pressure, filter element, and hose configuration depend on the material being applied and the finish your operation requires. Our finishing specialists can help confirm the proper setup before shipment.

Explore Financing

Get the finishing equipment you need while preserving working capital. Flexible financing can make it easier to invest in productivity, finish quality, and dependable equipment. Click the Approve icon on the product page to review available options and apply.

A Good Finish Begins Long Before the Trigger Is Pulled.

It begins with steady pressure, dependable equipment, and a system properly matched to the work. The WAGNER Puma 28-40 provides that foundation—quietly, consistently, and one carefully controlled pass at a time.

Order WAGNER model 2393655 today with free shipping, or call 817-490-1777 for pricing and configuration assistance.