WAGNER Wildcat 18-40 Cart-Mounted AirCoat Spray Pack

Controlled Pressure. Refined Atomization. Dependable Performance.

There is a quiet confidence that comes from using the right equipment. The pump cycles steadily, the spray pattern settles evenly across the work, and the finish begins to look exactly as you intended.

The WAGNER Wildcat 18-40 Cart-Mounted IceBreaker AirCoat Spray Pack (2393649) is built for that kind of working day. It combines controlled material delivery, professional AirCoat atomization, and WAGNER’s dependable pneumatic-pump technology in one complete, mobile finishing system.

At the center of the package is the WAGNER Wildcat 18-40 high-pressure piston pump. Its 18:1 pressure ratio produces up to approximately 2,089 PSI (144 bar), while material delivery up to 0.64 GPM (2.4 liters per minute) provides the pressure and flow required for professional finishing applications.

More pressure is not always the answer. Sometimes the better answer is controlled fluid pressure, properly selected atomizing air, and a system balanced for the coating. That is where the Wildcat 18-40 earns its place in a professional finishing operation.

Put controlled WAGNER AirCoat performance behind your finishing operation. Order model 2393649 or call 817-490-1777 for configuration assistance.

Why Choose the Wildcat 18-40?

• 18:1 pump ratio: Provides controlled fluid pressure for professional AirCoat finishing.
• Professional material delivery: Delivers up to 0.64 GPM for consistent manual and production spraying.
• IceBreaker air-motor technology: Helps reduce ice formation and the operating interruptions it can cause.
• Low-pulsation operation: Supplies a uniform material flow that supports consistent atomization and surface quality.
• Self-adjusting packings: Support dependable sealing while reducing routine packing adjustments.
• Durable fluid section: Uses hard-chrome-plated stainless-steel wear surfaces for demanding professional use.
• Anti-stalling pilot valve: Receives full air pressure to support quick pump reversals and reliable operation.
• High-pressure fluid filter: Helps capture contaminants before they reach the spray gun and tip.
• Complete AirCoat package: Includes the pump, spray gun, regulator, hose set, material supply, and filtration components.
• Mobile cart configuration: Makes the complete system easier to position, transport, organize, and service.

Professional AirCoat Finish Quality

WAGNER AirCoat technology combines pressure-assisted fluid delivery with supporting atomizing air. Fluid pressure performs much of the atomization work while the air cap helps soften, shape, and refine the spray pattern.

When the spray gun, air cap, tip, fluid pressure, and atomizing-air pressure are properly matched to the coating, the system provides a controlled spray pattern, efficient material transfer, and the finish quality expected by professional shops.

Uniform Material Delivery

The Wildcat 18-40 provides a consistently uniform material flow with particularly low pulsation. Stable material delivery helps the GM 4700AC maintain a predictable spray pattern and reduces pressure fluctuations that could affect the finished surface.

The IceBreaker air-motor design helps prevent power losses associated with ice formation, supporting dependable performance during extended spraying sessions.

Ideal Applications

• Cabinets, furniture, doors, and architectural millwork
• Wood products and commercial furniture components
• Metal fabrication, machinery, and industrial components
• Stains, sealers, lacquers, primers, and compatible topcoats
• Waterborne and solvent-borne coatings when properly configured
• Compatible base materials, catalysts, and premixed plural-component coatings
• Manual finishing stations and professional spray booths
• Production environments requiring mobility and controlled fluid delivery

Complete Spray Pack Includes

• WAGNER Wildcat 18-40 PE/TG pump: Part number 2329456
• Four-inch mobile trolley assembly: Part number 2325901
• IceBreaker AirCoat regulator: Part number 2328611
• Suction hose assembly: Part number 2324110
• High-pressure fluid-filter assembly: Part number 2329024
• GM 4700AC spray gun with air cap and tip: Model GM4700-BL413
• 25-foot twin air and fluid hose set: Part number 2309706
• Throat-seal lubricant: 250 mL container

Important: Confirm the supplied air cap, tip, fittings, and complete package configuration before ordering to ensure compatibility with your coating and finish requirements.

Quick Specifications

Actual performance depends on coating viscosity, spray-tip selection, air-cap configuration, hose arrangement, fluid pressure, atomizing-air pressure, and available compressed-air capacity.

System Requirements

The spray pack requires a properly sized supply of clean, dry, regulated compressed air. The available compressor capacity must support the requirements of both the Wildcat pump and the GM 4700AC spray gun.

All hoses, regulators, fittings, filters, air caps, and spray tips must be compatible with the coating and rated for the intended operating pressure. Always follow current WAGNER instructions covering installation, grounding, ventilation, pressure relief, operation, cleaning, and maintenance.

Match the System to the Finish

The correct air cap, spray tip, fluid pressure, atomizing-air pressure, filter, and hose configuration depend on the material being applied and the finish your operation requires. Our finishing specialists can help confirm the proper setup before shipment.

Explore Financing

Get the finishing equipment you need while preserving working capital. Flexible financing can make it easier to invest in productivity, finish quality, and dependable equipment. Click the Approve icon on the product page to review available options and apply.

Some Equipment Makes Noise. The Right Equipment Makes Progress.

The WAGNER Wildcat 18-40 Spray Pack is not here to make promises it cannot keep. It is here to deliver controlled pressure, dependable operation, and a professional finish—one pass at a time.

Order WAGNER model 2393649 today with free shipping, or call 817-490-1777 for pricing and configuration assistance.