C.A. Technologies Panther Zinc Repair Kit 10-108
Restore dependable performance to your C.A. Technologies Panther P200Z spray gun with the genuine 10-108 repair kit. This model-specific kit provides commonly serviced internal components for maintaining the Panther Zinc gun in demanding zinc-rich and corrosion-control coating applications.
Rebuild the wear points, stop the leaks, and put your Panther Zinc spray gun back to work.
Performance Highlights
- Designed for the C.A. Technologies Panther P200Z spray gun
- Made for the Panther Zinc gun used with zinc-rich coatings
- Helps replace commonly worn internal service components
- Supports proper air and fluid sealing
- Helps restore dependable triggering and gun operation
- Genuine C.A. Technologies repair kit
Built for Panther Zinc Spray Gun Maintenance
Zinc-rich primers and corrosion-control coatings can be demanding on spray equipment. Their high solids content and abrasive characteristics can accelerate wear on internal seals and moving components.
As these service parts wear, the spray gun may develop air leakage, fluid seepage, sluggish triggering, incomplete shutoff, or inconsistent spray performance. The C.A. Technologies 10-108 repair kit provides model-matched components to help restore the Panther P200Z and extend its useful working life.
Features
- Model-specific spray gun repair kit
- Made for the C.A. Technologies Panther P200Z
- Supports the rebuilding of commonly serviced internal areas
- Designed for proper fit and dependable sealing
- Suitable for routine and preventive maintenance
- Convenient alternative to ordering service components individually
- C.A. Technologies part number 10-108
Benefits
- Reduce downtime: Keep the correct repair kit available for scheduled service or unexpected maintenance.
- Control leakage: Replace worn components that may allow compressed air or zinc-rich coating material to escape.
- Restore dependable triggering: Properly serviced internal components help the gun respond and shut off correctly.
- Maintain coating consistency: A correctly operating gun supports repeatable material delivery and atomization.
- Extend equipment life: Routine rebuilding can keep the Panther Zinc gun in productive service longer.
Compatible Spray Gun
- C.A. Technologies Panther P200Z Zinc spray gun
Important: Confirm the model designation on your spray gun before ordering. Kit 10-108 is intended for the Panther P200Z and should not be confused with repair kits for standard Panther, glue, or HVLP models.
Common Applications
- Zinc-rich primers
- Corrosion-control coatings
- Protective industrial finishes
- Structural steel coating
- Marine finishing operations
- Fabrication and manufacturing facilities
- Industrial maintenance departments
When to Rebuild Your Panther Zinc Gun
Inspect or service the spray gun when you notice air leakage, fluid seepage, difficult triggering, incomplete fluid shutoff, reduced adjustment control, or irregular spray performance. Maintenance frequency depends on coating abrasiveness, solids content, production volume, operating pressure, flushing practices, and cleaning procedures.
Repair Kit Contents
Spray gun repair kits typically contain selected seals, gaskets, O-rings, springs, and other model-specific service components. Review the current C.A. Technologies Panther P200Z parts diagram to confirm the exact contents of kit 10-108 and the correct installation procedure before beginning service.
Installation and Service
Shut down the finishing system and completely relieve all air and fluid pressure before disassembling the spray gun. Flush the gun thoroughly and clean the exterior to prevent zinc-rich coating residue from entering internal passages.
Inspect the fluid needle, fluid nozzle, air valve, sealing surfaces, and related components for abrasive wear or damage. Install and lubricate replacement components only as directed by the current C.A. Technologies service instructions.
After reassembly, test the gun at a safe pressure and confirm proper triggering, shutoff, adjustment, and sealing before returning it to production.
Quick Specifications
- Manufacturer: C.A. Technologies
- Product type: Spray gun repair kit
- Part number: 10-108
- Compatible spray gun: Panther P200Z
- Primary application: Zinc-rich and corrosion-control coatings
- Service purpose: Spray gun maintenance and rebuilding
Keep Your Corrosion-Control Work Moving
A worn spray gun can slow production, waste expensive coating material, and compromise protection. Keep the C.A. Technologies 10-108 repair kit available so your maintenance team can service the Panther P200Z and return it to operation quickly.
Order the C.A. Technologies Panther Zinc Repair Kit 10-108 today, or contact us for help confirming compatibility.
