C.A. Technologies 51-551C 10-Gallon Resin Casting Pressure Tank
More room for pressure curing your castings.
The C.A. Technologies 51-551C gives resin casters a 10-gallon pressure
tank for molds and projects that need more space than a smaller casting
pot provides. Applying controlled pressure during the appropriate part
of the cure can compress trapped air bubbles and improve the appearance
of compatible resin castings.
Built from heavy-gauge steel, this non-ASME tank has a single air
regulator for adjusting tank pressure. Four casters help you position
it in the shop; stationary feet are available as an option. The
51-551C is supplied without an agitator or liner.
Features and specifications
- Model: 51-551C
- Capacity: 10 gallons
- Construction: Heavy-gauge steel, non-ASME tank
- Pressure control: One air regulator
- Agitator: None
- Liner: Not included
- Mobility: Four casters; optional stationary feet
- Maximum tank pressure: 80 psi
Plan your casting setup
Check your mold's outside dimensions against the tank's usable interior
space before ordering. Follow the resin manufacturer's instructions for
pressure, working time, and cure time; results depend on the material,
mold, mixing method, and process. The tank does not replace careful
mixing and pouring.
Need more room for your casting work?
Order the C.A. Technologies 51-551C, or call
817.490.1777
for help choosing a pressure tank that fits your project.
