C.A. Technologies 51-701C 15-Gallon Resin Casting Pressure Tank
Give larger casting projects room to cure under pressure.
When your molds outgrow a smaller casting pot, the C.A. Technologies
51-701C provides a 15-gallon pressure tank with single-regulator
control. Pressure curing can compress trapped air bubbles in
compatible casting materials, helping reduce visible defects in
the finished piece.
This non-ASME tank is constructed from heavy-gauge steel and
supplied without an agitator or liner. Its interior measures
14-1/2 inches in diameter by 21-1/2 inches deep, providing space
for larger molds or multiple smaller molds that fit within the
available clearance.
Features and specifications
- Model: 51-701C
- Application: Resin casting and pressure curing
- Capacity: 15 gallons
- Construction: Heavy-gauge steel, non-ASME tank
- Pressure control: Single air regulator
- Agitator: None
- Liner: Not included
- Inside dimensions: 14-1/2-inch diameter by 21-1/2-inch depth
- Maximum tank pressure: 80 psi
Plan your casting setup
Check your mold's outside dimensions and loading clearance before
ordering. Use the casting material manufacturer's recommended
pressure and cure schedule within the tank's rated limits. Results
depend on the material, mold, mixing method, and timing; pressure
curing does not replace careful mixing and pouring.
Ready for more casting capacity?
Add the C.A. Technologies 51-701C to your cart, or call
817.490.1777
for help choosing a pressure tank that fits your casting work.
Replacement lid gasket
Shop the 51-720 tank lid gasket.
