C.A. Technologies 51-881 12.5-Gallon Stainless Steel Pressure Tank
Stainless steel capacity with straightforward pressure control.
The C.A. Technologies 51-881 gives your pressure-feed finishing
system a 12.5-gallon material supply and a single regulator for
tank-pressure control. Its larger capacity supports longer spray
runs with fewer stops to refill.
Constructed from stainless steel inside and out, this non-ASME
tank is the standard top-outlet configuration. Wheels help you
position it around the shop, while stationary feet are available
as an option. Model 51-881 does not include an agitator.
Features and configuration
- Model: 51-881
- Capacity: 12.5 gallons
- Construction: Stainless steel inside and out
- Tank classification: Non-ASME
- Outlet configuration: Standard top outlet
- Pressure control: One regulator for tank pressure
- Agitator: Not included
- Mounting: Wheels included; stationary feet optional
Match the tank to your coating
Choose the 51-881 when your process calls for stainless steel
construction and a regulated material supply without continuous
agitation. Match the coating, fluid hose, and spray gun to the
required material flow. Separate control of spray-gun atomizing
air may be needed, depending on your system.
Confirm compatibility with all wetted components before use.
If your coating requires continued mixing, choose an agitated
tank configuration.
Ready to add regulated stainless steel capacity?
Add the C.A. Technologies 51-881 to your cart, or call
817.490.1777
for help matching the tank to your spray gun and hose assembly.
