C.A. Technologies 51-554 10-Gallon Pressure Tank with Dual Regulators and Air Agitator
More capacity, controlled feed, and continuous mixing.
The C.A. Technologies 51-554 is built for finishing work that calls
for a larger material supply and continued mixing during application.
Its air-powered agitator helps keep compatible coatings mixed, while
two regulators allow separate adjustment of tank pressure and
spray-gun atomizing air.
This 10-gallon, non-ASME pressure tank is constructed from heavy-gauge
steel. Two fluid outlets with shutoff valves provide connection options
for your spray setup. Four casters help you position the tank in the
shop; stationary feet are available as an option.
Features and specifications
- Model: 51-554
- Capacity: 10 gallons
- Construction: Heavy-gauge steel, non-ASME tank
- Regulation: Two regulators for tank pressure and atomizing air
- Mixing: Air-powered agitator
- Fluid connections: Two outlets with shutoff valves
- Inside dimensions: 12-1/2-inch diameter by 21-1/2-inch depth
- Mobility: Four casters; optional stationary feet
- Maximum tank pressure: 80 psi
Put together the right finishing system
Match the tank, agitator, fluid hose, and spray gun to your coating's
viscosity and mixing requirements. The 51-554 gives you the capacity
for longer spray runs, with separate pressure adjustments to help
dial in material delivery and atomization.
Ready to set up your 10-gallon pressure-feed system?
Order the C.A. Technologies 51-554, or call
817.490.1777
for help choosing the right spray gun and hose assembly.
Liners, gasket, and parts
