C.A. Technologies 51-514 5-Gallon Bottom Outlet Pressure Tank with Air Agitator
Keep heavier coatings moving and mixed.
The C.A. Technologies 51-514 combines a 3/4-inch bottom fluid outlet
with an air-powered agitator. It is a practical choice when your coating
needs a larger outlet for delivery and continued mixing in the tank to
limit settling during application.
This 5-gallon, non-ASME pressure tank is constructed from heavy-gauge
steel with a baked-on finish. Its single regulator controls tank pressure.
The bottom outlet includes a ball valve, and four casters let you position
the tank around the shop. Stationary feet are available as an option.
Features and specifications
- Capacity: 5 gallons
- Construction: Heavy-gauge steel, non-ASME tank
- Fluid outlet: 3/4-inch bottom outlet with ball valve
- Pressure control: Single air regulator for tank pressure
- Mixing: Air-powered agitator
- Mobility: Four casters; optional stationary feet
- Inside dimensions: 12-1/2-inch diameter by 15-1/2-inch depth
- Maximum tank pressure: 80 psi, subject to the flammable-material limit below
Choosing the right setup
The 51-514 suits coating processes that call for bottom-outlet feed and
ongoing agitation. Confirm the coating's viscosity, required flow,
mixing method, and compatibility with the steel tank before use. A
separate air-pressure control may be needed at the spray gun when
atomizing-air adjustment is required.
Pressure and safety: C.A. Technologies specifies that
this non-ASME tank must not be pressurized above 15 psi when
spraying flammable materials. The general maximum tank
pressure is 80 psi. Follow the product manual and your coating
manufacturer's instructions.
Need a tank that feeds and mixes your material?
Order the C.A. Technologies 51-514, or call
817.490.1777
for help matching the tank, spray gun, and hose to your application.
Parts and product information
